Menu

1.866.933.7486

Quest Climate Control Equipment

LARGE DESICCANT DEHUMIDIFICATION

Our Quest PowerDry 4800D Pro, constructed in a rugged, all aluminum frame, is less than half the weight of many competitive units. This lightweight durable construction allows the 4800D to be able to be transported in an extended bed of a pickup truck and placed exactly where you need it on the jobsite. This close proximity feature helps in ducting the unit and greatly reduces the amount of static pressure needed as the need for run lengths are reduced and bends are decreased and/or eliminated. But what sets the 4800D Pro apart from the competition is the reliability and simplicity of this unit.

The PowerDry 4800D Pro removes over 3,000 pints of water per day at AHAM (80°F/60%RH) and has an extended operating range of -10°F to 140°F. The 4800D Pro is equipped with a reactivation temperature sensor that controls the amount of heat going into the rotor; therefore the desiccant is always operating under optimum conditions.

The PowerDry 4800D Pro is equipped with a circuit breaker, eliminating down time caused by blown fuses. Weighing just 1600 lbs. and mounted on a narrow 48” skid, this unit is much easier to transport than many units of similar capacity. Requiring only 106 amps, this 4800 CFM desiccant consumes less energy than competing designs.

Quest Large Industrial Desiccants Will:

  • Dry in virtually any condition (-10°F to 140°F)
  • Dry when maximum dew point depression is needed
  • Dry concrete floors rapidly to allow additional flooring to be applied
  • Perfect for tank lining and industrial coating projects
  • Can be used on any large drying project
  • Safe, easy-to-use, rugged, powerful drying
quest powerdry 4800d pro e

CLICK PHOTO FOR LARGER IMAGE

Quest PowerDry 4800D Pro E 480V

Part No. 4028203 (With Frame)
4029193 (Without Frame)
Water Removal 379 gallons/day
@ AHAM 80°F, 60% RH
Process Airflow 4800 CFM
Power – three phase 106 amps, 480V
quest powerdry 4800d pro e

CLICK PHOTO FOR LARGER IMAGE

Quest PowerDry 4800D Pro E 600V

Part No. 4034810 (With Frame)
4034800 (Without Frame)
Water Removal 379 gallons/day
@ AHAM 80°F, 60% RH
Process Airflow 4800 CFM
Power – three phase 88 amps, 600V
quest powerdry 4800d pro e

CLICK PHOTO FOR LARGER IMAGE

Quest PowerDry 4800D Pro P 240V

Part No. 4028204 (With Frame)
4029193 (Without Frame)
Water Removal 379 gallons/day
@ AHAM 80°F, 60% RH
Process Airflow 4800 CFM
Power – single phase 70 amps, 240V